|
|
 |
|
|
SL-SD-927PKC-NFQ |
|
|
 |
|
|  | | The ENFORCER “No Touch” Request-To-Exit Sensor uses IR technology to request egress from a protected area or activate a device with the simple wave of a hand. Since it requires no touch, this sensor is ideal for use in hospitals, clinics, labs, cleanrooms (to reduce the risk of contamination), schools, factories, or offices.
- No Touch -- just wave a hand in front of sensor.
- Sensing range up to 4" (10cm). (Range for SD-927PWCQ is up to 2” (5 cm))
- Reliable IR technology senses motion.
- No touch reduces the risk of cross-contamination.
- Stainless steel or white plastic single gang plate.
- 3A relay, triggers min. 0.5 sec. or as long as hand is near the sensor
- LED illuminated sensor area for easy identification.
- LED changes color to show the relay is triggered.
- Quick-connect screwless terminal block.
| | | Model # | SD-927PKC-NxQ | SD-927PWCQ | | Current Draw | 40mA@12VDC | | Operating Voltage | 12VDC | | Relay Type | Form C (NO/NC/COM) | | Switching capacity | 3A@24VDC | | Response Time | 10mS | | LEDs | Standby | Green | Red | | Triggered | Red | Green | | Output Time | 0.5S or as long as unit is triggered | | Range | Up to 4" (10cm) | Up to 2" (5cm) | | Operating Temperature | -4°~131° F (-20°~55° C) | | Weight | 3oz (85g) | 2.5oz (70g) | | Dimensions | 41/2"x23/4"x15/16" (115x70x33.5mm) |
|
|
|
|
|
|
|
|
|
|
