|
|
 |
|
|
ACT-CR244 |
|
|
 |
|
Description:
The CR244 is an A10 enhanced powerline carrier
coupler repeater for distributing Powerline Control
signals to all phases of power. It has DIP switches
that enable the user to customize its operation
depending on the application.
CR244 is housed in a grey painted enclosure that
is designed to mount on a 4-11/16" by 4-11/16"
electrical box. LED's in the cover indicate operation
modes.
Features:
- Designed to mount on a 4-11/16" x 4-11/16" electrical box
- X10 Signal and SCC (Signal Carrying Conductor) Compatible
Smart SCC - Always enabled. Does not repeat SCC signals
received on the SCC line.
- Status LED's visible on Cover
- Internal Screw terminals for wiring connections
- Fuse Protected
- Improved receive signal response, higher signal output
- Internal DIP switches can select special features such as:
- Priority SCC - Will allow Signal Carrying Conductor signal to take priority over any other code being received.
- Receive at 0O or 30O - Either one.
- Repeat or Ignore Repeated Signal - "Repeat repeated" enabled repeats all signals including those from other
repeaters. "Ignore Repeated" repeats all signals except those from another repeater.
- X10 Extended Code/ACT Extended Code - Can accept either, one at a time.
- Repeat on ALL Active Phases/Repeat on SCC only
- Window Normal/Window Sensitive - Shifting the sine wave to the window sensitive mode can improve
reception in selected installations.
Applications:
CR244 Repeats X10 & A10 powerline carrier transmission signal on all phases of a 240/415 VAC 50 Hz three phase power
system, when it is heard on one phase or on the Signal Carrying Conductor (SCC).
|
|
|
|
|
|
|
