|
|
 |
|
|
AAM-80080 |
|
|
 |
|
80080 -
Approved for all drapery. -
Traverse 9-feet one-way, or 16-feet center open. -
Installation time - 15 minutes. -
Fits all drapery cords without modification. -
Has a dial so you can easily set any open and closed positions you desire. -
Includes illustrated instructions, owner's manual and one year written warranty. -
AC-DC plug-in Adapter with 6' cord. -
No ladder, no drilling, no electrical work. -
Motorize Any drape with U shaped loop cord -
User adjustable auto stops: fully open, fully closed, all between -
Powerful motor controls drapes up to 60 lbs. -
Works with drapes, vertical blinds and many horizontals
This drape controller now makes motorized drape control affordable. Control of this unit is simple — apply power and it moves from the current position to one limit position. Remove and reapply power and it will reverse and move to the opposite limit. Remove power at any intermediate point and it will stop.
Installation is easy — simply hang at the bottom of the U loop of the drape pull cord. Attach wall bracket and plug AC adapter into an X10 Appliance Module or A/C timer. No cutting of the pull cord is required.
Works with both cord and ball chain type pulls. Use with an A/C timer, X10 Appliance Modules (not included), or Add-A-Motor Butler for remote control or automatic timed operation.
CHILD PROTECTION FEATURES:
Satisfies US Consumer Product Safety Commission (CPSC) guideline to eliminate exposure to cord and chain loops. Meets American National Standards Institute (ANSI) guideline for an affixed tamper-resistant device to secure window covering cords and chains in a taut position. Has safety guard and sensor that can automatically interrupt or prevent motor operation. Normal run time limited to less than 45 seconds. Manual switch can instantly stop motor if running. Low voltage design has UL/CSA Listed AC-DC Adapter. Remote control is UL Listed and FCC approved
|
|
|
|
|
|
|
