This ITI passive infared (PIR) motion sensors utilize the latest in technical improvements to provide superior battery life and improved motion detection in harsh environments. The 60-700-95R SAW PIR uses two AA alkaline batteries and the 60-703-95 Crystal PIR uses one or two AA lithium batteries.

This PIR detect movement within a sepcific area by sensing the infared energy emmited from a body as it moves across the sensor's field of view, causing atemperature change in the sensor's zones. When this motion is detected, the sensor transmits an alarm signal to the control panel.

The indoor motion sensor can be used to protect locations where door/window sensors are impractical or not needed. For example, use a motion sensor to protect large areas or open floor plans. Motion sensors also provide backup protection door/window sensors.

Use the outdoor motion sensor to identify motion in an outdoor area. Detected motion in this protected area can sound chimes or turn on outside lights.

These wireless motion sensors include the following features:

• 35 feet by 40 feet coverage area for standard and optional animal alley lenses
• Masking kit provided to block portions of coverage area
• Three minute transmitter lockout time after an alarm that helps extend battery life
• Cover-activated tamper (optional wall-activated tamper is included)
• Supervisory signal transmitted every 64 minutes to the control panel
• Sensor low battery reports to the control panel
• Field-selectable sensitivity options (indoor PIRs)
• Compatible with all ITI Learn mode Control Panels