|
|
 |
|
|
SR-5812AW |
|
|
 |
|
GE Security 5812AW Rectangle Acoustic Sensor, UL Listed. Tamper
The 5812AW acoustic glassbreak sensor provides great false alarm
immunity, fast installation testing, and a handclap feature that lets
end-users confirm the sensor’s operational status. Using Sentrol’s
patented Pattern Recognition
Technology™, the sensor listens for actual patterns of breaking glass
while eliminating most false alarm patterns. 5812AW sensors listen
across the glassbreak frequency spectrum for greater false alarm
immunity. A new test feature makes installation faster by eliminating
the test mode jumper. The 5812AW is tested by activating the Sentrol
hand-held glassbreak tester at close range. Opening the sensor is
unnecessary. A simple hand-clap feature lets end-users confirm at any
time that the 5812AW is perational. The sensor will blink twice but
will not trip when a hand clap is made close to the unit. The 5812AW
detects in a full 360° coverage pattern, with a 25' (7.5 m) radius from
sensor to glass. The 5812AW is suitable for use in quiet occupied areas
on the perimeter loop.
Features
- Designed for quiet occupied areas on the perimeter loop
- End-user can test sensor operation with a clap of the hands
- Listens across the glassbreak frequency spectrum for greater false alarm immunity
- Consistent detection even of soft, quiet glass breaks
- Detects through blinds and light drapes
Specifications
- Model: 5812AW
- Operational voltage: 9 to 16 V DC
- Current draw: 12 mA typical; 25 mA max.
- Relay output: Normally closed, open 4 seconds on alarm
- On resistance: 5 to 15 Ohms
- Off resistance: 20 MOhms
- Maximum loop rating:(relay or tamper loop): 16 V DC, 50mA
- Lightning suppression: 400 watts for 1 msec pulse
- Operating temperature: 0°F to 120°F (-18°C to +50°C)
- RFI immunity: 20 V/meter from 1 to 1000MHz
- Housing material: Flame retardant ABS plastic
- Microphone: Omni-directional 360° electret
- Sensitivity setting: Factory set
- Range: 25' (7.5 m) measured to the farthest point on all glass 25' (7.5 m) on the opposite wall
- Plate glass: Up to 1?4" (6.4 mm)
- Tempered glass: Up to 1?4" (6.4 mm)
- Wired glass: Up to 1?4" (6.4 mm)
- Laminated glass: Up to 1?4" (6.4 mm)
- Mounting location: Ceiling or any wall
- Minimum distance from glass: 3.3' (1 m)
- Dimensions: 1.75" (4.5 cm) H; 3.25" (8.3 cm) W; 0.88" (2.3 cm) D
- Color: White
|
|
|
|
|
|
|
