|
|
 |
|
|
HAI-RC-90B |
|
|
 |
|
Features
- Single stage heating and cooling systems
- Zoned damper controls systems
- 1 stage cool, 1 stage heat with B and O terminals for master control
- Available in two versions: Omnistat and Omnistat-Z with built-in Z-Wave transceiver
- Large "cool blue" LCD backlight that displays time, temperature and mode.
- Selectable Fahrenheit or Celsius display, AM/PM or 24 hour time format
- Outdoor temperature display (when connected to Omni-family controller and using outdoor sensor)
- Simple user controls for: Mode, Fan, Set, Hold, Raise and Lower Temperature.
- Non-volatile program and setting memory: no batteries required for long term, maintenance-free operation.
- Automatic Changeover between heating and cooling modes (can be configured for manual changeover if auto is not desired).
- Heat Only and Cool Only modes.
- Adjustable cycle times.
- Adjustable Anticipator
- System Runtime monitor (this week, last week; hours).
- Filter Clean/Replace indicator reminds owner to clean filter to
maintain best efficiency and performance. This reminder is based upon
the time the fan has run. It indicates "Filt" on the display to suggest
changing the filter. This reminder is reset by pressing the Prog key.
- Compatible with systems using 24 volt (20 to 30 V) AC or DC controls.
- 5-1-1 programming capability: Separate schedules for Weekdays,
Saturday and Sunday, with separate heat and cool settings for morning,
day, evening and night. Internal scheduler can be disabled for use with
automation systems.
- High limit for heat setting is adjustable by installer.
- Low limit for cool setting is adjustable by installer.
- Uses transformer common wire.
- Energy Star compliant and UL Listed.
|
|
|
|
|
|
|
