Your Home Automation Superstore!

PHONE: (214) 245-4594 • (713) 535-9199 • (408) 239-4043
708 Valley Ridge Cir. Suite 5 • Lewisville, TX 75057 View Map
5634 Westpark Drive • Houston, TX 77057
Ground shipping only $8.50 for most orders!Click here for detailed shipping information.

Live Chat Live Help Software for Website

Cart Summary
Your Cart is Empty
View Cart

Navigation
 Home
 Lighting Control
 Elk Security & Automation
 HAI Security & Automation
 2gig Technologies
 Home Automation Software
 Other Automation
 Automation Audio
 Automation Amplifiers
 Automation Speakers
 Other Automation Controllers
 Other devices
 Security Batteries
 Security Systems with Lite Automation
 Security Speakers & Sirens
 Cortexa Home Automation Controllers
 Audio & Home Theater
 Surveillance Systems
 Structured Wiring Supplies
 Touchscreen Devices
 Intercom Systems
 Power Backup: Conditioning & Distribution
 Vacuum Systems
 Access Control
 Telephone Systems & IP Telephony
 Books
 Tools
 HVAC Control
 Hosted IP Telephony
 Somfy Shades
 Luxul Wireless Networking
 Wired Contacts & Sensors
 Wireless Security Systems
 Distributed Audio Systems
 LED Light Bulbs
 Leather Seating
 Alarm.com
Arrow Arrow Browse by Manufacturer

Licensed CE Training School
Alarm CE School

License #: Y00116

Automated Outlet is upfront


homeautomation_twitter homeautomation_facebook
homeautomation_youtube homeautomation_linkedin
  CRN-PZM-10
pzm10_medium.jpg A low-profile microphone featuring a cylindrical design for ceiling, wall or tabletop installations. Intelligibility is excellent, with low frequencies below the voice range rolled off to reduce the pickup of HVAC rumble. XLR connector, phantom powered. Specifications Transducer type: Electret condenser. Frequency response (typical): PZM-10: 80 Hz to 20,000 Hz. See Fig. 1. PZM-10LL: 100 Hz to 20,000 Hz. See Fig. 2. Polar pattern: Hemispherical. Impedance: PZM-10: 240 ohms, balanced. PZM-10LL: 75 ohms, balanced. Recommended minimum load impedance 1000 ohms. Open circuit sensitivity: PZM-10: 2.5 mV/Pa* (–52 dBV/Pa). PZM-10LL: 1.4V/Pa* (+3 dBV/Pa). See Table 1. Power sensitivity: PZM-10: –52 dBm/Pa*. PZM-10LL: +8 dBm/Pa*. Equivalent noise level (self-noise): 26 dB SPL typical (0 dB = .0002 dyne/cm2), A-weighted. S/N Ratio: 68 dB at 94 dB SPL. Maximum SPL: 120 dB SPL produces 3% THD. Operating voltage: PZM-10: 12 to 48V phantom power, positive voltage on pins 2 and 3 with respect to pin 1. PZM-10LL: 12 to 24V DC, positive voltage on red lead with respect to shield. Polarity: PZM-10: Positive pressure on the diaphragm produces a positive voltage on pin 2 with respect to pin 3 of output connector. PZM-10LL: Positive pressure on the diaphragm produces a positive voltage on white lead with respect to black lead. PZM-10 ® PZM-10LL POLAR PATTERN Current drain: PZM-10: 400 microamperes. PZM-10LL: 2.8 mA at 12V DC, 4.22 mA at 24V DC. See Table 1. Output connectors: PZM-10: Male XLR type (3-pin pro audio). PZM-10LL: None. Cable: PZM-10: None supplied. Use 2-conductor shielded mic cable. PZM-10LL: 12-in., permanently attached 3- conductor shielded cable. Red: B+, White: audio+, Black: audio–, Shield: ground. Materials: Steel plate and housing. Finish: Off-white. May be painted any color; take care to first seal the opening between the capsule and boundary plate. Model PZM-10BLK has a black finish, and can be custom ordered from your Crown dealer. Net weight: PZM-10: 2.6 oz. (73.6 g). PZM-10LL: 3.3 oz. (93.9 g).

 
Tell a Friend