|
|
 |
|
|
PCS-DDT |
|
|
 |
|
The Desktop Timer is a high quality home automation timer
device that is capable of transmitting and receiving digital commands and status over the existing powerlines.
Designed as a table top plug-in unit, it will t ransmit standard UPB commands at specified times of the day or upon a press of a push-button.
The DDT can be programmed to control single lights, groups of lights
and trigger dramatic scenes containing 8 dimmers or load
controls.
Controller Features
- Manual Programming
- Timer Scene Control
- Astronomical Time Clock
- 5 Year Warranty
- Easy Installation
- Perfect For Retrofit
- Low Cost Home Automation
- PCS Reputation
- Create a network and add up to eight devices without UPStart
- Store up to 4 on and off times with up to 8 devices per event
- Buttons on the top allow direct control of each unit
- Events can be activated at specific times or via
sunrise or sunset( with offsets plus or minus 128 minutes)
- Just Plug it in
- Transmits signals over existing power wiring so
there is no need for expensive hard wiring.
- UPB based products are a fraction of the expense of wireless RF and hard wired systems.
- The PCS reputation is unmatched in the Home Automation market representing superior quality, high reliability, and excellent customer service.
- ON/OFF Override
- Battery Back-up
- 10-Year non-volatile memory
Colors
The TEC comes in a black
plastic enclosure.
Operation
The DDT will store up to 4 individual timed events to occur daily. Each event may be programmed as an absolute time or relative to sunrise or sunset settings (based on your geographic location), and may have an offset of
plus or minus 128 minutes. Each dimming device may be programmed to turn on at its own preset light level, ranging between0%and 100%.
The DDT comes in a 120VAC plug-in table top black enclosure with five buttons on the top of the unit for instant control and programming. A 2- line LCD Monochrome display shows the day of the week, date, time and status of the 8 devices. The display is also used for initial configuration and
programming.
The Desktop Daily Timer has a 10 year battery back-up and will automatically adjust for Daylight Saving Time. Multiple DDTs can be supported in one system if more than 4 events are needed.
Easy to Configure
The DDT is manually programmed so UPStart Setup Software is not necessary. Simple configurations using the buttons on the top allow the user to set the following parameters; Time of Day, Latitude/ Longitude, Network ID, 8 devices to the network, default on light levels, as well as, the 4 timers containing fromone to eight units.
The Desktop Daily Timer is designed to be an integral part of a complete PulseWorx Lighting Control System. Like all PulseWorx devices, the DDT uses the patented UPB™ powerline communication technology (invented by PCS) to reliably communicate with any other UPB-compatible device(s) over the home’s existing electrical wires. No new wires are necessary making PulseWorx perfect for retrofit situations. When initial configuration is complete, the DDT will automatically activate any group of lights (or virtually anything else that connects to AC power wiring) throughout the house simultaneously.
PulseWorx Lighting Control System
The Timed Event Controllers are designed to be an integral part of a complete PulseWorx Lighting Control System. Like all PulseWorx devices, the TEC uses the patented UPB™ powerline communication technology (invented by PCS) to reliably communicate with any other UPB-compatible device(s) over the existing house electrical wires. No new wires are necessary making PulseWorx perfect for retrofit situations. When initial configuration is complete, a single push of a button is all you need to activate any group of lights (or virtually anything else that connects to AC power wiring) throughout the house simultaneously.
|
|
|
|
|
|
|
