|
|
 |
|
|
TA-COM-IN-50HF |
|
|
 |
|
COM-IN-50HF 165' Outdoor Combination Intelligent Double Modulated Quad photoelectric beam and Microwave sensor, Improved catch performance during difficult weather conditions, Auto Gain control, Environmental Monitoring circuit, 2 frequencies available, Tamper circuit, 12V to 30VDC
Features:
4 synchronized high power infrared beams Sensitivity attenuation LED - Lights when beam level is attneuated, which shows low sensitivity. Monitor jack output Protection against frost/dew - A special hood is attached on sensor cover, beam protection continues without interruption even when the cover is screened by frost or dew. Automatic gain control (AGC) circuit Alarm output mode "AND" or "OR" are selectable with a switch. Microwave antennae and PE beam lenses adjustable - (horizontally plus/minus 90 degrees - vertically plus or minus 10 degrees) Tamper output Pole or wall mount
Specifications | | Info from | Automated Outlet | | Protection distance | 3.3 ft. (1m) to 165 ft. (50m) | | Max. arrival distance | Photoelectric beam: 1500 ft. (500m)(tenfold margin distance)
Microwave: approx 330 ft. (100m) | | Infrared beam | LED (pulsed beam by LED)
Double modulation | | Microwave | (L) 24.11GHz - (H) 24.19GHz | | Detection system | Photoelectric beam and microwave | | Response time | Photoelectric beam sensor: 50msec. to 700msec. (Variable at pot)
Microwave: 40 msec to 300 msec (Variable at pot) | | Alarm signal | Dry contact relay output 1C
Contact action: Interruption time + delay time (approx. 2 sec)
Contact capacity: 30V (AC/DC) 1A | | Environmental signal | Dry contact relay output NO or NC
Contact capacity: 30V (AC/DC) 0.5A | | Supply Voltage | 12 to 30 VDC | | Power consumption | 165ma or less at protection
Transmitter: 65ma or less
Receiver: 100ma or less
200ma or less while beam alignment
Transmitter: 65ma or less
Receiver: 135ma or less | | Tamper signal | Dry contact output 1b(N/C)
Contact capacity: 30 V(AC/DC)0.1A | | Functions | Alignment tone switch, Attenuation LED, Monitor jack,
Alarm memory indication, Modulation frequency selectable (4 stage),
Emvironmental check, Automatic gain control (AGC) circuit,
Frost protection cover, Alarm output selectable (AND/OR) | | Weight | Transmitter 1850g Receiver 2000g | | Appearance | Wine red PC resin |
|
|
|
|
|
|
|
