|
|
 |
|
|
ELK-PD9HC |
|
|
 |
|
These Power Distribution Modules
conveniently distribute a single A.C.
or D.C. input into nine individual outputs, for centrally
powering
Video Cameras, PIRs, Photobeams, etc. Each output is protected
with an
auto-resetting PTC to protect a shorted output from disabling
the
other outputs. A visual LED power indicator is provided for
each
output along with a single Master Power On/Off Switch. The
modules
accept a 6 to 30 Volt A.C. or D.C. power source (not included)
which
connects either to the input terminal block or the 2.1mm D.C.
power
jack located on the module. Two or more outputs can be
paralleled for
additional current.
• Auto-Resetting (PTC) Overload Protection (NO FUSES to
REPLACE).
• Master Power On/Off Switch.
• Visual LED Power Indicators on each Output.
• Convenient Test Points for measuring Total Current
Draw.
• Lifetime Limited Warranty.
• Paintable White Plastic |
• Max Current Draw:
• Max Combined Current Draw:
• Input/Output Voltage:
• Input Connection:
• Output Connection:
• Enclosure Size: |
PD9 =
250mA from each output.
PD9HC = 400mA from each output.
Not to exceed Input Power Source.
6 to 30 Volts AC or DC.
Screw Terminals or 2.1mm Plug-In DC Jack.
Screw terminals (POS and NEG) for each output.
6.5" x 4.3" x 2". |
|
|
|
|
|
|
|
