|
|
 |
|
|
X10-TM751 |
|
|
 |
|
The powerful Transceiver Module is the backbone for any Home Automation setup. It allows you to remotely control any household appliance or light that is plugged into an appliance, lamp module, wall switch module or any of our many other lighting and appliances products. Simply plug the Transceiver into any normal wall socket, and using the remote, you have control of your lamps and appliances from across the room – or the other side of the house. The wireless transceiver module is an integral part of your home control system. It takes radio frequency commands from X10 remote controls and wireless motion sensors and converts them to X10 signals carried over household wiring. The TM751 allows you to control any household appliance or light that is connected through a lamp or appliance module to your household wiring. Set up your own "home network" and make your home work for you! The wireless transceiver module also functions as an appliance module. Simply plug an appliance into it, and you have full control over that appliance! Note: For larger X10 systems, you will need 1 Transceiver per house-code setting. For example, if you have all your interior lights on House Code A, all your exterior lights on House Code B, and all your wireless cameras on House Code C, you would need 3 Transceivers. Simply set each transceiver to its corresponding House Code. For smaller X10 systems, you can have your cameras and lights on one house code (ex. House Code A), and would only need one Transceiver.
|
|
|
|
|
|
|
